BluePrint BP38318CTC1 S/B Chevy 383 Dressed Crate Engine

Description

HP and torque : 436 HP / 443 FT LBS, Compression Ratio: 10.0:1, Aluminum Heads, Hydraulic Roller Cam, Cast Steel Crank, Hypereutectic Pistons
BluePrint BP38318CTC1 S/B Chevy 383 Dressed Crate Engine
Sku # 227BP38318CTC1
Mfr. Part # BP38318CTC1
Condition
New
Brand
BluePrint Engines
Sold
Each
Details
Notes
Not for EGR.
Recommended Oil:
Recommended Harmonic Balancer: BPP400
Recommended Stall Converter: 2000 to 2400 RPM.
Recommended Fuel: 91 Octane.
The Aftermarket intake manifold installed on this engine may not be compatible with OEM accessory brackets that use intake mounted bosses.
This engine features a true 4 inch bore, which mathematically yields 377 CID with a 3.75 inch stroke
Info
BluePrint Engines builds high-performance crate engine to replace your tired old factory engine! These crate engines are high-performance drop-in engines offering substantially more horsepower than the factory original. Crate engines or crate motors from BluePrint Engines offer a custom builder, hot rodder, or kit car builder an engine that is ready to drop in the vehicle. BluePrint crate engines come in several levels of dress - from a shortblock all the way to complete with all the components that will be needed to start and run the engine very quickly. No extensive cleaning or installation of parts is required. In addition, BluePrint crate engines are dyno-tested and are shipped with a documentation of their high-performance power curve.
DESCRIPTION
436 HP / 443 FT LBS
10.0:1
BluePrint Performance Aluminum Heads (Part# H8002K)
Hypereutectic Pistons
Roller Cam
Cast Steel Crank
BLOCK:
NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
New BluePrint Cast steel crankshaft
3.750" Stroke
OEM type 5.700" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
External Front/ External Rear
CYLINDER HEADS:
BluePrint Performance Aluminum Heads (Part# H8002K)
64cc Chamber
2.02 Swirl Polished Intake Valves
1.60 Swirl Polished Exhaust Valves
Hardened Retainers and Springs
CAM SPECS:
Cam Type: Roller
.544 Intake .555 Exhaust
230 Intake / 236 Exhaust duration
@ .050, 110 ° lobe separation angle
IGNITION TIMING:
Initial timing - 10-16° and Total timing 32-34° at 3500 RPM
ALSO INCLUDES:
Dual Plane, Satin Aluminum Intake Manifold
Holley 750cfm Carburetor - Manual Choke
New Chrome Timing Cover
Distributor
Melling High Volume Oil Pump
New Chrome Valve Covers
Painted Oil Pan
Passenger Side Dipstick
Dyno test results shipped with engine
WARRANTY:
30 month / 50,000 mile
Charts
(PDF)
Specs
Sold in Quantity
Each
Cylinder Head Style
Assembled
Spark Plug Style
Straight
Rear Main Seal Style
1-piece
Camshaft Type
Hydraulic Roller Tappet
Piston Material
Hypereutectic Aluminum
Combustion Chamber Volume
64cc
Crankshaft Material
Cast Steel
Cylinder Head Material
Aluminum
Crate Engine Type
Deluxe Crate Engine
Engine Balance
External
Intake Manifold Included
Yes
Valve Covers Included
Yes
Assembled
Yes
Cylinder Heads Included
Yes
Carburetor Included
Yes
Throttle Body Included
No
Distributor Included
Yes
Oil Pan Included
Yes
Timing Cover Included
Yes
Water Pump Included
No
Harmonic Balancer Included
No
Flexplate Included
No
Flywheel Included
No
Air Cleaner Included
No
Spark Plugs Included
No
Spark Plug Wires Included
No
Computer Included
No
Wiring Harness Included
No
Intake Valve Diameter
2.02
Exhaust Valve Diameter
1.60
Engine Displacement
383
Notes
Recommended oil for your BluePrint Crate Engine: 10W30, Non-Synthetic, Not for EGR
Horsepower
436
MFG. Part #
BP38318CTC1
Compression Ratio
10.0:1
Intake Runner Volume
195cc
Bore x Stroke (in)
4.000" x 3.750"
Camshaft Duration (.050 in)
230° intake / 236° exhaust
Camshaft Lift (in)
.544 intake / .555 exhaust
Connecting Rod Material
OEM Style
Recommended Fuel
91 Octane
Warranty
30 month / 50,000 mile
Block
New BluePrint 4 bolt main, 1 piece rear main seal
Torque
443 ft./lbs.
GTIN Code
816671020519
Related Items / Suggested Parts
Small Block Chevy 400 Harmonic Balancer, 8 Inch, Plain Steel
BluePrint BPP6PK710 Break In Motor Oil, 6 Quarts
Speedmaster 1-229-011 168 Tooth Billet Flywheel, Chevy 350
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.