BluePrint Engines BP3501CTC1 S/B Chevy Vortec 350 Deluxe Crate Engine

Description

Crate 350 C.I. engine provides 365 horsepower right out of the box, Features 9.1:1 compression and has a 1-piece rear main seal, Pistons are made from hypereutectic aluminum, A hydraulic flat tappet style camshaft provides 224° intake / 230° exhaust duration, Crankshaft is made of cast steel while the cylinder heads are made of cast iron
BluePrint Engines BP3501CTC1 S/B Chevy Vortec 350 Deluxe Crate Engine
Sku # 227BP3501CTC1
Mfr. Part # BP3501CTC1
Condition
New
Brand
BluePrint Engines
Sold
Each
Details
Notes
Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR
Info
BluePrint Engines builds high-performance crate engine to replace your tired old factory engine! These crate engines are high-performance drop-in engines offering substantially more horsepower than the factory original. Crate engines or crate motors from BluePrint Engines offer a custom builder, hot rodder, or kit car builder an engine that is ready to drop in the vehicle. BluePrint crate engines come in several levels of dress - from a shortblock all the way to complete with all the components that will be needed to start and run the engine very quickly. No extensive cleaning or installation of parts is required. In addition, BluePrint crate engines are dyno-tested and are shipped with a documentation of their high-performance power curve.
DESCRIPTION
HP & Torque: 365 HP / 405 FT LBS
Compression Ratio: 9.1:1
Cast Iron Heads
Roller Cam
Cast Steel Crank
Hypereutectic Pistons
BLOCK:
NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
Cast steel crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear
CYLINDER HEADS:
Vortec cast iron heads; 64cc chamber
Hardened retainers and springs
1.94 intake valves
1.50 exhaust valves
CAM SPECS:
Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Using 1.5 rockers
IGNITION TIMING:
10-16 degrees initial, 32 -34 total
ALSO INCLUDES:
Valve covers
Oil pan
Thermostat, thermostat housing
Timing cover
Chrome air cleaner
Intake Manifold
600cfm carburetor
HEI Distributor
Spark plugs and wires
Harmonic balancer
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Rear Main Seal Style
1-piece
Camshaft Type
Hydraulic Flat Tappet
Piston Material
Hypereutectic Aluminum
Crankshaft Material
Cast Steel
Cylinder Head Material
Cast Iron
Crate Engine Type
Deluxe Crate Engine
Intake Style
Dual Plane
Camshaft Included
Yes
Intake Manifold Included
Yes
Assembled
Yes
Cylinder Heads Included
Yes
Carburetor Included
Yes
Distributor Included
Yes
Oil Pan Included
Yes
Timing Cover Included
Yes
Harmonic Balancer Included
Yes
Flywheel Included
No
Air Cleaner Included
No
Spark Plug Wires Included
Yes
Engine Displacement
350
Flexplate Included
Yes
Horsepower
365
MFG. Part #
BP3501CTC1
Compression Ratio
9.1:1
Warranty
30 month / 50,000 miles
Bore x Stroke (in)
4.000" bored .040 over x 3.480"
Camshaft Duration (.050 in)
224° intake / 230° exhaust
Camshaft Lift (in)
.480 intake / .486 exhaust
Block
4 bolt main
Cylinder Heads
Vortec heads, 64cc
Notes
650 CFM Carburetor included, fuel line from pump to carb needed. Fuel pressure pre-set.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.